Seats for recumbents with a short wheel base

The seats for recumbents with a swb are commonly characterized by a "flat" angle of the seat to the horizontal line. The driver, therefore, needs a seat which prevents him from slipping back while pedaling, in other words he needs a seat which is adjusted to his height or better  the length of the individual driver’s back.

info

Seats for "lwb"recs, tricycles and quads

The seats for scooterbikes and recumbents usually have a rather upright position. The therefore much more burdened seating area - on conventional bikes, the "saddle" - must be formed ideally.

info

Seat for trikes and quads with medium seat angle

Ideal for seat inclination between 30 and 50 degrees and a good lateral support (and a warm back in winter), the Novosport tricycle seat features a large seating area, a good lateral support around the waist, and full freedom to deal against the centrifugal forces in the curve.

more

Meshseat

Here we show our comfortable mesh seat. You will find no seat that is wider and more comfortable.

info

Seat cushions

For all seats we recommend our seat cushions, which are highly aerated prevent strong and unpleasant sweating in the summer.

info

Seats for "short" recumbents

Which size for my seat?

In order to find out the right size for your seat please sit down with your back straight to a wall. Now check the height from the groundfloor to the area between your back and neck.
Up to 63 cm (= 25 inches) please order size "S",
up to 68 cm (= 27 inches) size "M",
up to 72 cm (= 28,5 inches) size "L",
for a height more than 72 cm (> 28,5 inches)  please order size "XL".

Our seats are in length from tip to tip resp. flat :

"S" = 72 cm /84 cm, "M" = 76 cm /88 cm,
"L" = 80 cm /92 cm, "XL" = 84 cm /97 cm.

.

Lowriderseat

Newly improved design!
The cutouts in the back improve the ventilation on hot summer days and let you guide your bike through narrow streets, crowded places or inside the house. Furthermore we minimized the weight without giving up stability.

Available in sizes "M", "L", and "XL".

The seating area is larger than all comparable products - especially those of low-cost suppliers - and is ergonomically shaped with a support against slipping forward - Ergohold.

The cutouts can be done relatively easily with equipment from the hardware store or, against a surcharge of 25, - € for you when ordering such seat.

Seat as above, without cutouts.

The "Uni-seat"

Stepless size adjustement from "S" to "XL"
In order to change the size you only have to adjust one thumbscrew and two other smaller ones. You do not need any tools for the adjustments.

It weighs only about 100 gramms more than a non-adjustable seat.

The cutouts in the back improve the ventilation on hot summer days and greatly improve handling.

.

.

.

Racingseat ultralight

The seats can be ordered made from carbon fiber instead of glass fiber. This way the weight can reduced to approx. 500 g or 700 - 800 g depending on the size of the seat.

Hier: Rennsitz auf  Kundenwunsch in Kevlar Carbon

Price, general infos

  pricelist seats and cushions

  Hinweise zur Montage

  customer comments

Back to top

Seats for "lwb"recs, tricycles and quads

Seats for Recumbents with a long wheelbase, tricycles and quads: The seats for scooterbikes and recumbents usually have a rather upright position. This means, that the size of the driver is not an important aspect for the construction of the seat: one size fits all.

But the therefore much more burdened seating area - on conventional bikes, the "saddle" - must be formed ideally. Furthermore the seat, depending on the typ of vehicle, must guarantee sufficient side support.

Like with all of our seats, the weight can be reduced through the right choice of materials. For the lwb seats we also offer several variations for different types of vehicles and areas of intended use.

► "Scooterseat wide" with support of the waist

►  Recumbent seat for tricycle

►  Lowriderseat for tricycle

Scooterseat wide

This seat was made for scooter bikes and respective trikes on which the the driver sits in an upright position (seat angle vertical to horizontal between 70° and 80°).

Ein Kunde schrieb uns zu dem Sitz: "Der bestellte Sitz .....ist das Beste, was ich je als Sitz für ein Sesselrad gefahren bin. Nochmal besten Dank und alles Gute."
H.U.Kirwald

Weil so häufig danach gefragt wird: auch dieser Sitz muß wie der Sitz unten im Bereich der Sitzfläche und im Bereich der Rückenlehne (im oberen Drittel, vorzugsweise im Bereich des Kreises) am Rahmen befestigt bzw. abgestützt werden.

This seat is available in 2 Versions:
Seat for 2-wheeler: total length is 77 cm, 22 cm for the seating area and 55 cm for the backrest. Max. width is  25 cm.

Seat for trikes: total length is 83 cm, 25 cm for the seating area and 58 cm for the backrest. Max. width is  31 cm.

Recumbent seat for tricycles

Lowriderseat for tricycles

The seating area is shaped like a spoon and gives strong support, while the back area is flexible and enables the driver to lean back.

Perfect for sportive tricycles with a flat seating position. The seat available will fit persons up to a size of 1,85 m and weight up to 85 kg only.

Direct length from tip to tip: 80 cm, max width: 35 cm; weight in glassfibre: 1, 6 Kg, 8.8 Kg in carbon.

Price, general infos

  pricelist seats and cushions

  Sicherheitshinweise zur Montage

  customer comments/questions

Back to top

Meshseat

Here we show our comfortable mesh seat. You will find no seat that is wider and more comfortable

It is made of light alloy piping, 30 mm or 1 1/8" in diameter, powder coated.
Weight incl. mesh: ca. 2,0 KG
Width:                   41 cm
Seat-length:          22 cm 
Backlength:          48 cm  (medium area)
Shoulderlength     22 cm  (upper area)

It comes with mounting elements for frame tubes from 40 mm to 80 mm. Inform when ordering, please

Price: 218,60 € plus shipping to ..?????

 

Price, general infos

  pricelist seats and cushions

  Sicherheitshinweise zur Montage

  customer comments/questions

Back to top

Sportpads/Comfortpads

Our seats for every time of the year and for every area of intended use. For the winter we recommend our seatpads made from isolating foam, which can be produced for any type of seat, even for the airy stringed seats. For hot summer days we would rather recommend our aerated seatpads.

We offer all our seatpads in 3 versions:

• sportpads (upper pad in the picture)
• comfortpads (middle pad in the picture)
• super air pads (low pad in the picture)

The differences may be not as visible in the picture as they noticeable are during the driving experience.

Material

All of our seat pads have a threedimensional spacer mesh core. The core of our seat pads consists of 98% permeable to air head space.

This mesh fills the rest of the core with polyester yarn. This yarn is extremly stable and will always regain its’ original shape even after years and years.

The black cover fabric also consists of this special mesh, in a even finer structure.

During the coloration the frabric receives its’ water repellent quality which discharges and lets perspiration vaporate quickly. Our seat pads therefore quickly cool off and always feel dry.

NEW: Seatspads for stringed seats!
More comfort in the summer and more warmth in the winter!

Is your seatpad uncomfortable?

Is your seat too cold in the winter?

We have developed a new seatpad for stringed seats, which can be easily attached to your seat.

Because of the changable interior cushioning the seats are permeable to air in the summer and cozily warm in the winter.

Seatpads for RollFiets, Hase-Bikes, Kettwiesel, Lepus, Tagun, and Trets!

Sitzabschluss (Foto links).

Klettverschluß aufreißen, dann kann das Innenpolster im Winter gegen Schaumstoff ausgetauscht werden. (Foto rechts)

Dimensions, prices

Maße unserer Standardpolster für Kurzliegersitze:
The length of the pads for our lowriderseats in sizes S, M, L and XL
when spread flat, are
"S" = 83 - 84 cm,
"M" = 87 - 88 cm,
"L" = 92 - 93 cm,
"XL" = 97 - 98 cm

Der Aufbau unseres Sportpolsters (von unten nach oben):

Industrievlies:                 1,0 mm
Schaumstoff:                  6,5 mm
Spacer, grob:                12,0 mm
Spacer, fein, schwarz:     3,0 mm

Der Aufbau unseres Polsters Comfort:
Industrievlies:                 1,0 mm
Schaumstoff:                  6,5 mm
Spacer, fein:                 20,0 mm
Deckschicht:             Spacer fein

Please note: The seats after 2005 were redesigned and an ergohold applied. They are, therefore, about 4 cm longer than the previous models. Cushions before 2005 were therefore approximately 4 cm shorter.

  pricelist seats and cushions

  customer comments/questions

Back to top